|
| | Trantec UHF Systems S4.16 - 16 Channel System
|
|
The
new Trantec S4.16 UHF system boasts a
multi-function receiver, 16 selectable
frequencies and the latest PLL quartz
tuning technology, making it the
ultimate choice when looking for a
product that will address your demands
now, and into the future.
The S4.16 has 16 selectable
frequencies incorporating the existing 4 licence
free Channel 70 frequencies, already being used
in the S4.4, allowing the user to operate up to
12 frequencies together intermodulation free.
The receiver has detachable antennae to allow
the use of antenna distribution and remote
antenna for larger sets. |
|
The S4.16 system is
available in Lapel and Aerobic versions, which
can be switched for use with a musical
instrument, plus a Handheld with a dynamic
capsule.
The S4.16 has a host of
additional features including LEDs on the
receiver showing Power On, AF Peak level, RF
Level and Diversity Channel A or B. In addition,
the diversity operation receivers have rear
mounted detachable antennae and variable gain
jack plug output.
The handheld version is
fitted with a dynamic capsule and the beltpack
has a locking 3.5mm jack plug. The transmitter
battery life is in excess of ten hours.
|
THE RANGE
- S4.16L-EA-UK: Beltpack/Guitar
system
- S4.16H-EA-UK: Handheld
system with dynamic head transmitter
- S4.16W-EA-UK: Aerobic
system
All S4.16 systems are
supplied with antenna, battery, instrument lead
and power supply.
|
RACK MOUNTING OPTION
|
The S4.16 gives the user the
ability to run more frequencies, but we realise
this means a potentially intimidating tangle of
wires to connect if the antennae are to be
distributed from a single pair. We have
therefore come up with various assembled racks
giving the user a "turnkey solution"
for a set price. Included in this price is the
receivers and transmitters (in any combination
of beltpack or handheld) a professional quality
19" rack, power supplies, antenna
distribution units, antenna head amps, 10m of
antenna cable, antenna mounting kit and antenna
stands. These come in 4, 8 and 12 way versions. |
Model No.
|
System Configuration
|
Price (Excl.VAT)
|
| S4.16L-EA-UK |
UHF
Lapel/Guitar System (Inc. Microphone) |
£254.47
|
| S4.16W-EA-UK |
UHF
Headband System with SJ66 Mic and belt |
£325.31
|
| S4.16M-EA-UK |
UHF
Dynamic Handheld System |
£254.47
|
| S4.16-Rack-4 |
4 x
S4.16 Rx & Tx, ADUs, etc. in a rack |
Price on application
|
| S4.16-Rack-8 |
8 x
S4.16 Rx & Tx, ADUs, etc. in a rack |
Price on application
|
| S4.16-Rack-12 |
12 x
S4.16 Rx & Tx, ADUs, etc. in a rack |
Price on application
|
TECHNICAL SPECIFICATION
|
S4.16RX-EA RECEIVER
|
| RF
Frequency Range: Channel 70 Frequencies;
863.150, 863.725, 864.150, 864.850MHz
Channel 69 Frequencies 854.900, 855.900,
856.175, 856.575, 857.950, 858.200,
858.650, 859.500, 860.400, 860.900,
861.200, 861.750 MHz |
| 16 Channel Capability |
| Audio
Frequency Response: Handheld 80Hz-16kHz
(+/-3dB), Belt pack 60Hz-16kHz (+/-3dB) |
| Audio
S/N Ratio: >96dBA |
| Audio
output: Variable to +10dBu via
unbalanced 1/4" mono jack, +16 dBu
via balanced XLR 3F |
| Display:
4 position RF bar graph, AF Peak
(Overload), Diversity A/B |
| DC Input: 12V, 100mA |
| Dimensions: 35 x 213 x 98mm |
| Weight: Approx 580g |
S4.16LTX-EA TRANSMITTER
|
| 16 Channel capability |
| Controls:
Frequency select, On/Off switch,
Lapel/Instrument select, Gain adjust |
| Indicator: Battery status LED |
| LP2 Lavalier microphone: Omni-directional
back electret condenser |
| Operating voltage 9v @ <50mA |
| Operating time approx 10 hours |
| Power Output: Max 10mW |
| Connectors: Audio input via 3.5mm jack
socket |
| Dimensions: 60 x 100x 30mm including belt
clip |
| Weight: Approx 90g |
| Fully meets with requirements of ETSI
300-422/455, FCC part 74h |
S4.16HTX-EA TRANSMITTER
|
| 16 Channel Capability |
| Controls: Frequency select and On/Off
switch |
| Indicator: Battery status LED |
| High quality cardioid dynamic head |
| Operating voltage 9v @ <50mA |
| Operating time approx 10 hours |
| Power Output: Max 10mW |
| Dimensions: 280 x 50 max (including
grille) |
| Weight: 210g |
| Fully meets with requirements of ETSI
300-422/455 FCC part 74h |
|
