/* $VER: MOC 40.1 (28.11.98)
 *
 * MO file system entry for the FIRST PARTITION of AT-HD type MS-DOS FAT disks.
 *
 * This file enables CrossDOSFileSystem on an MO disk cartridge.
 *
 * CrossDOS reads the LowCyl and HighCyl information from of the MS-DOS
 * partition table on the disk. It should also read the block size; if not,
 * uncomment the SectorsPerBlock and SectorSize lines.
 *
 * There can be up to 10 partitions on an AT-HD type disk. Which one you
 * access is determined by the last letter of the device name, C for the first
 * partition, D for the second and so on.
 *
 * So this mount file for MOC: accesses the first partition. To access other
 * partitions, copy this mount file and rename to create MOD:, MOE:, etc.
 *
 */

FileSystem	= L:CrossDOSFileSystem
Flags		= 0
Surfaces	= 1		/* dummy value, not used */
BlocksPerTrack	= 32		/* dummy value, not used */
/* SectorsPerBlock	= 1	this might be a dummy value */
/* SectorSize	= 512		this might be a dummy value */
Mask		= 0x7FFFFFFE	/* Change to suit your system and SCSI controller */
MaxTransfer	= 0xFFFFFFFE	/* Change to suit your system and SCSI controller */
Reserved	= 2		/* dummy value, not used */
Interleave	= 0
LowCyl		= 0		/* Must be 0 for CrossDOS automatic partition detection */
HighCyl		= 9999		/* dummy value, not used */
Buffers		= 128		/* Number of filesystem buffers */
BufMemType	= 1
DosType		= 0x4D534800	/* MSH\0 */
StackSize	= 4000
Priority	= 10
GlobVec		= -1

/* The Device and Unit fields are controlled by tooltypes in the MOC icon.
 *
 * Device	= scsi.device
 * Unit		= 4
 */