Home
Products
Contact
|
APPLICATION
Stir well prior to use. The paint should be applied by
Brush or Roller. Surfaces should be clean and free from
surface contamination such as grease, oil, loose or
flaking paint. Previously unpainted concrete floors are
best treated with two coats, the first thinned with 10-15%
thinners KPT04 to act as a sealer coat, and the second
coat unthinned. All tools and equipment should be cleaned
immediately after use with thinners type KPT04.
HOW TO APPLY
1. Sweep up Loose Debris.
2. Ensure floor is free from oil & grease.
3. Paint by hand round wall edges, pillars machinery etc.
4. Thin the first coat of floor paint with 10% thinners
and apply to floor, leave to dry overnight with adequate
ventilation.
5. Apply second coat of floor paint full strength leave
to dry overnight with adequate ventilation.
6. Floor is ready for use after 12 hours with adequate
ventilation.
7. It is ALWAYS better to apply two thin coats rather
than one thick coat.
|
|
