CLICK HERE FOR 
ANTI-SLIP AEROSOLS

SP Epoxy Anti-Slip

Available as a satin finish or with slip-resistant aggregate

Home

Products

Contact

An epoxy floor coating with outstanding adhesion and has excellent resistance to abrasion, scuffing, scratches, petrol, oils, diesel, dilute chemicals etc. On curing it provides a tough and durable textured finish with good anti-slip properties. Suitable for use on steps, ramps and inclines or where the working environment demands the additional safety element provide by a textured finish. This product represents one of the best single pack floor coating systems on the market, ideal for use in factories, warehouses, offices, showrooms, workshops, garages, hotels, schools etc.

How to apply:
1. Sweep up loose debris.
2. Ensure the floor is free from grease and oil.
3. Where necessary paint around machinery, pillars and fixtures etc.
4. Thin the first coat with 10% thinners KPT06 and apply.
5. Leave the first coat to dry overnight. 6. Apply the second coat full strength. 7. Leave to dry overnight.

Helpful hints:
Unpainted floors will give a longer dust free life if treated with two coats.
New floors should be at least 4 weeks old before painting. With a moisture content of less than 7%.
Floors that are treated with a chemical hardener may not be suitable for painting, if you are unsure test a small area prior to painting.
It is always better to apply two thin coats rather than one thick coat.