Measuring 2 1/2" (64MM) with a lens 1 7/8" (47MM) these mini indicators look smart and unobtrusive.

Fitted with a 12V 23W bulb they are bright enough to do their job and be seen.

Easily fitted to any bike these indicators give much greater safety, particularly at night, without ruining the appearance £19.95 / pair . Particularly suitable for classics, these are reproductions of the Hella units fitted to 1960s BMWs and the Norton Electra. Pt.no. INDCB22/6 6V & INDCB22/12 12V

Indicator switch £6.95 Pt.no IND694997

Flasher unit £4.00 Pt.nos. 6V INDWRE05 12 V INDWRE06

The mounting stud is 8MM x 25MM so the indicators cam be used to mount the headlamp, & on many bikes A10s, Dommis etc can be used insted of the rear mudguard mounting bolt.

They are priced at £15.95 / Pr.

Indicator switch £6.95. Flasher unit £4.00 6 or 12V

The lens is 2 1/2" long and 1 1/8" at its widest

Pt.no.INDCADJ + 6V OR 12V

The Universal indicators are also available in black with chrome mountings Pt.no INDUADJBLK + 6V or 12V

They are priced at £15.95 / Pr.

Indicator switch £6.95 Pt.no. IND694997

Flasher unit £4.00 Pt.no. 6V INDWRE05 or 12V INDWRE06

The lens is 2 1/2" long and 1 1/8" at its widest

The thread is M8 & 25MM long & comes with a locknut.

4 x Universal Ind., 1 x flasher unit, 1 x handlebar switch + wiring diag.

£42.85 Pt.nos. INDUNIKITC or INDUNIKITB + 6V or 12V

These are reproductions of the Lucas indicators fitted to 1970s BSA, Triumph and Nortons. They are 2 5/8" in dia.These are £7.95 each, £15.90 / pair.

3.0" Stalks Pt.no IND10057 + 6V or 12V

5.0" Stalks Pt.no. IND10170 + 6V or 12V

Indicator switch £6.95 Pt.no IND694997

Flasher unit £4.00 Pt.no. INDWRE05 6V or INDWRE06 12V

St./St. Locknuts to suit £1.00 ea. 7/16" UNF

6V or 12V Pt.no.INDLN01

Similar to indicators fitted to 1970s Moto Guzzis

LED teardrop indicators. Can be wired for either positive or negative earth.

Lens dia 33MM length 68MM stem 20MM without spacer or 42MM with spacer as shown. M10 mounting.

These draw 1W and are TUV approved & E marked.

Pt.no. INDLEDP&W

£30.00 per pair (Only 1 pair left)

Minature LED indicators. Only 40MM long. Can be wired for either positive or negative earth. Polished chrome finish, clear lens with amber leds.

Pt.no. INDLED13

£39.90 per pair

LED indicators. Can be wired for either positive or negative earth. Black finish, clear lens with amber leds. Long or short, long shown

Pt.no. INDLED18 - LONG

Pt.no. INDLED19 -SHORT

£19.95 per pair

Amber LED bulb replacement. This replaces the standard 12V 21W indicator bulb so can be fitted into the Lucas type indicators above but in 12V negative earth only.

Pt.no. LEDACE24A £12.95 ea.

12V Flasher units are available to suit LED indicators in

2 pin £9.95 Pt.no. INDWRELED01 2 pin

3 pin £12.95 Pt.no. INDWRLED02 3 pin

This flasher unit is available in either 6V or 12V.

It will operate 2 x 9W to 2 x 23W bulbs. It is a 3 pin device, if you want a 2 pin it will work, just don't use the centre terminal.

34MM dia (+ mount) x 18MM (+ terminals)

£4.00 Pt.nos. INDWRE05 6V or INDWRE06 12V

Handlebar switch

3 position indicator switch is for handlebar mounting and features a 'centre-off' position £6.95

Pt.no IND694997

Compact Multipurpose handlebar switch No. 1

Pt.no. IND694600

Just over 1 1/8"" wide (30MM)

Clamps around the standard 7/8" handlebar

Headlight: Dip, Main

Indicators.

Horn.

£29.95

Click here for wiring details

Right handlebar switch No. 2

Pt.no. IND694605

Just over 1 1/8"" wide (30MM)

Matching right hand switch:

Engine run/off

Lights on/off

Electric start or flasher.

£29.95

Multipurpose light switch No. 3

Clamps around the standard 7/8" handlebar

Lights:Off, Pilot, Main

Headlight: Dip, Main, Flash

Indicators, Horn and a Choke (Advance/Retard) that can be removed if not required

£28.95 Pt.no IND144353

Click here for wiring details

The switch is 1 9/16" wide (39MM)