Paypal users add £1.00 for orders over £20.00

Add £1.50 carriage up to £10. £10 - £20 add £2.00,

£20.00 - £50.00 add £3.00 Over £50.00 add £6.00

Overseas bulb & LED orders add £1.00. Other overseas orders E mail for carriage costs.

1/4 x 1/4 BSP brass lever. Pt. no. PT73084

1/8 x 7/16 BSP brass lever. Pt. no. PT73082

1/8 x 1/4 BSP brass lever. Pt. no. PT73083

£26.00

Pt.no. PT73066 £26.00

1/4 x 1/8 BSP Push-on, Push-off with nut spigot, chrome plated.

Pt.no. PT73068 £26.00

1/4 X 1/4 as above but with reserve lever £19.95 Pt.no. 73088

Pull-on, Push-off 1/4 BSP Brass

Supplied with 3/8 x 1/4 BSP reducing bush

Pt.no.PT73086 £26.00

Pull-on, Push-off 3/8 BSP x 1/4" nut & banjo

BSA type with single or twin outlet banjo

Pt.no.PT73099 £39.95

1/4 x 1/4 BSP Flat lever, Chrome plated

Pt. no. PT73091 main Pt. no.PT73092 reserve

With indicator plate PT73095 main PT73096 reserve

£9.95

Pull-on push off twist to lock replacement plungers with corks, chrome plated. These will also fit taps that originally didn't have twist to lock plungers.

Length of the shaft excluding the Knob, 24MM Dia of the shaft 8.5MM with the cork a little larger.

Pt.no. PT73104 £6.00 ea.

Replacement corks for pull-on push off taps. As fitted to tap plungers above. These fit the Pt.no.PT73099 above and many original taps.

Pt.no.PT73106 £0.75p ea.

Replacement corks for pull-on push off taps. These fit the Pt.no.PT73066 above and many original taps.

Pt.no.PT73105 £0.75p ea.

Petrol tap adapter 3/8 x 1/4 BSP. Now plated.

Pt.no. PT73119 £2.95 each

Petrol tap adapter 1/4 x 1/8 BSP. Now plated.

Pt.no. PT73118 £2.50 each

1/4" x 1/4 BSP nut & hosetail £3.50

Pt. no. PT73051

1/4" x 1/4 BSP nut & hosetail elbow £3.75

Pt. no. PT73051/1

1/4" x 1/4" Tee piece plated

Pt. no. PT73057

£2.50

1/4 / 1/4 BSP Hex nipple. Coned seat, St./St.

£2.50

Pt.no. PTS0014

Petrol tap washers 3/8 BSP pack of 10

Pt.no. PT73117 £2.00 each

Petrol tap washers 1/4 BSP pack of 10

Pt.no. PT73116 £2.00 each

Filters for 1/4" (6MM) petrol hose approx. 1" dia.

Pt.no.PT FFTCL £2.00 each

Plated brass ferrules for 1/4" bore 'rubber' petrol line. These can be crimped if you have the proper tool, but when used with the black 'rubber' hose below give a tight seal when simply pushed on.

Pt. no. PT73021

0.75P ea OUT OF STOCK

Available in 1/4", 5/16" and 3/8" bore, this hose is suitable for petrol or hot engine oil at up to 16.5 bar. Sold in 1.0 Metre lengths. Proof against Superunleaded with methanol additive.

1/4" Pt.no.OILH014 £3.50

5/16" Pt.no. OILH516 £4.00

3/8" Pt.no. OILH038 Not suitable for petrol £4.50

St./St. Jubilee type hose clips in sizes to suit

1/4" jubilee type clips to suit 0.60P Pt.no. OILJUB014 0.60Pea.

5/16" jubilee type clips to suit 0.60P Pt.no. OILJUB516 0.60P ea.

3/8" jubilee type clips to suit 0.60P Pt.no. OILJUB038 0.75P ea

St./St 'O' clips in sizes to suit. These can be crimped with the proper tool, in the vice or using a pair of cutters.

1/4" O clips Pt.no.OILO014 0.60Pea.

5/16" O clips Pt.no.OILO516 0.60P ea

3/8" O clips Pt.no.OILO038 £1.00P ea